Sprinkler Hanger With Lining...

Sprinkler Hanger With Lining...


A SPRINKLER HANGER recommended providing vertical support to non-insulated piping systems. By adjusting the position of the sprinkler nut on the hanger rod at the top of the hanger, pipe elevation can be altered


A SPRINKLER HANGER consists of a piece of mild steel shaped to support pipe. provides double thickness at the support. suitable for fire extinguishing pipe installation. Lower Part is covered with EPDM lining

Approvals: UL Listed & FM Approved ANSI/MSS SP-58 & SP-69(Type 10) Federal Specification WW-H-171E & A-A-1192A(Type 10)
Type: Pipe Hanger
Material: Mild Steel. Also other materials can be provided on request Lining is of EPDM
Sizes: Min - 3/4" | Max - 10"
Max Temp: -20°C to 110°C
Finish: Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake & Epoxy Coated
Max Load: As per Size
Min Load: As per Size

Get A Quote